LocostUSA.com http://www.locostusa.com/forums/ |
|
Cool Notching Jig http://www.locostusa.com/forums/viewtopic.php?f=15&t=13314 |
Page 1 of 1 |
Author: | BrianG701 [ February 9, 2012, 7:20 am ] |
Post subject: | Cool Notching Jig |
I found this searching for Lathe mounted tube notchers http://youtu.be/cqCq5v44V1c the price isn't that bad either and they have some nice and somewhat locost accessories too the webiste for them is http://www.notchingbuddy.com/ |
Author: | SkinnyG [ February 9, 2012, 9:02 pm ] |
Post subject: | Re: Cool Notching Jig |
This is how I do mine: You can shim the holder for offset notches. |
Author: | BrianG701 [ February 10, 2012, 4:48 am ] |
Post subject: | Re: Cool Notching Jig |
Nice setup SkinnyG, how does it do with a bent tube? |
Author: | SkinnyG [ February 10, 2012, 5:02 am ] |
Post subject: | Re: Cool Notching Jig |
I haven't needed to do any bent tube with it yet. I imagine a shorter angle-iron clamp piece would work, as long as you could still keep it secure. Or utilize some sort of shim. |
Author: | BrianG701 [ February 10, 2012, 5:07 am ] |
Post subject: | Re: Cool Notching Jig |
That could definitely do the trick, I might give it a go when I get home from Germany and get my lathe back together |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |