LocostUSA.com

need some Logos cut out of brass for my business, wondering if anyone has skill and equipment to help me out.

Steve

_________________
Pictures of just a few of my projects

Hey VB, nice to hear from you. I hope business is good

There a bunch of places that will laser cut stuff from flat stock for you now. It's becoming a big industry for small orders.

Here's a Canadian place that specializes in brass...
http://www.thefabricator.com/article/lasercutting/shop-perfects-laser-cutting-brass-titanium\

Somewhere along here there was a link to this place from a 3D maker's forum, I can look some more later this weekend, out tonite...
http://www.ponoko.com/laser-cutting

_________________
Marcus Barrow - Car9 an open design community supported sports car for home builders!
SketchUp collection for LocostUSA: "Dream it, Build it, Drive it!"
Car9 Roadster information - models, drawings, resources etc.

looking for something a bit more than just 2d cut.

_________________
Pictures of just a few of my projects

3d can be done with an EDM machine. 15 years ago I watched an EDM cut a 1" cube of stainless into a block that had the number 1 on one side morph into the number 2 on the back side. Quite impressive.

Tom

_________________
Sometimes, I'm as confused as a baby in a topless bar.

My short term memory is absolutely horrible and so is my short term memory.

https://www.youtube.com/watch?v=sG16m2e4O6I

well I guess I'm looking for something a little more 2d then that.

I'm looking to have my logo machined into a brass plate, with the logo raised, background relieved.
if it looks good, to be used as a plug for casting multiples of them.

_________________
Pictures of just a few of my projects

got the logo almost all done

we're considering brass circles etched with the logo. kinda like a coin, but without so much sculpting.

anyone think they can help?

_________________
Pictures of just a few of my projects

I might be able to help you out.