LocostUSA.com http://www.locostusa.com/forums/ |
|
MNot's Bimmer M42 > Getrag > T-bird IRS Haynes Roadster http://www.locostusa.com/forums/viewtopic.php?f=35&t=16005 |
Page 30 of 52 |
Author: | Mnot [ May 8, 2019, 8:15 pm ] |
Post subject: | Re: MNot's Bimmer M42 > Getrag > T-bird IRS Haynes Roadster |
I have gotten a bit of work done over the last few weeks. The dash is now steel although not final painted, I wanted it black to get an idea of what it will look like when done. Ultimately, I plan to paint it in a heavy wrinkle finish. Attachment: Dash.JPG I created the tank straps which use U-bolts for tension. Attachment: Fuel Cell Straps.JPG And I created the curved frame pieces that follow the curve of the rear fender. I am surprised how much these limit the seat sliding backwards. Luckily, I have 2 more clicks backward from where I need to be to reach the pedals (I am 6' 3"). |
Author: | Lonnie-S [ May 9, 2019, 10:59 am ] |
Post subject: | Re: MNot's Bimmer M42 > Getrag > T-bird IRS Haynes Roadster |
It's all looking very nice. I especially like the dash - very clean. Cheers, |
Author: | Mnot [ May 9, 2019, 8:33 pm ] |
Post subject: | Re: MNot's Bimmer M42 > Getrag > T-bird IRS Haynes Roadster |
Thanks Lonnie! All of the gauges are easily visible (although I might rearrange the order) and all switches are easily actuated with gloves on. |
Author: | Mnot [ May 15, 2019, 8:03 am ] |
Post subject: | Re: MNot's Bimmer M42 > Getrag > T-bird IRS Haynes Roadster |
This week I have been working on the front fender mounts (aka: wing stays). I really don't have to many options as to how to mount the stay to the hub so I used Caterham's idea to use the upper ball joint stud. I have a vertical leg in the front going to the steering arm where the adjustable steering stop would mount. The main piece is 1.5"x 0.125" and the rest is 1.0"x0.125". I plan to use rubber isolator washers to allow the fiberglass fender to move slightly. I also plan to add a gusset at the 45* bend on the vertical leg. Please feel free to make suggestions as this has been an item I was not looking forward to and I am unsure if it will be strong enough. Attachment: Fender Stays.JPG Attachment: Fender Stays 2.JPG Attachment: Fender Stays 3.JPG Attachment: Fender Install Side view.JPG
|
Author: | hfmaxi [ May 15, 2019, 10:50 am ] |
Post subject: | Re: MNot's Bimmer M42 > Getrag > T-bird IRS Haynes Roadster |
What are the dimensions on those front fenders. I'm having a hack of a time sourcing anything at a reasonable price and will probably end up making my own as well. Looks great. |
Author: | Mnot [ May 15, 2019, 7:13 pm ] |
Post subject: | Re: MNot's Bimmer M42 > Getrag > T-bird IRS Haynes Roadster |
hfmaxi wrote: What are the dimensions on those front fenders. I'm having a hack of a time sourcing anything at a reasonable price and will probably end up making my own as well. Looks great. They are 37" long when measuring around the arc and 9.5" wide. They were made for a 205/50r15 tire. racepedals made the mold using a steel fender and then added a strip of metal in the middle to create the mold for them. |
Author: | Mnot [ May 25, 2019, 4:03 pm ] |
Post subject: | Re: MNot's Bimmer M42 > Getrag > T-bird IRS Haynes Roadster |
I got my serial number from the state today (aka: VIN)!! Now I just have to complete the car and take it to the DMV for inspection and it will be a street legal vehicle |
Author: | Racepedals [ May 25, 2019, 5:00 pm ] |
Post subject: | Re: MNot's Bimmer M42 > Getrag > T-bird IRS Haynes Roadster |
Looks good. I'm jealous--- I have not been able to touch mine in a long time. |
Author: | Miatav8,MstrASE,A&P,F [ May 27, 2019, 4:33 am ] |
Post subject: | Re: MNot's Bimmer M42 > Getrag > T-bird IRS Haynes Roadster |
Those fenders do look great. If you are still looking for fender mount input, here are a few mods to what you have that will make it more rigid so it does not flex, work harden, then crack. When/if they do, might want to make them the legs easily removable on the side of the road. Just cut off the legs 3 inches above the ubj, flange both sides of the 3 inches down to the ubj plate, drill two 3/8 bolt holes to hang the legs on, then make new legs that overlap the three inches. Don't worry about unsprung weight when it comes to fender mounts. |
Author: | Lonnie-S [ May 27, 2019, 3:12 pm ] |
Post subject: | Re: MNot's Bimmer M42 > Getrag > T-bird IRS Haynes Roadster |
Congratulations to you, of course. Getting a VIN is huge. On the other hand, I'm even more jealous than Racepedals. Cheers, |
Author: | Mnot [ May 28, 2019, 10:20 pm ] |
Post subject: | Re: MNot's Bimmer M42 > Getrag > T-bird IRS Haynes Roadster |
The compliments on the fenders go to Racepedals as they are from his mold. But I agree, I really like the look of them and there is enough "meat" to rotate them toward the rear to guard against kick up from the tires. |
Author: | Mnot [ July 5, 2019, 4:51 pm ] |
Post subject: | Re: MNot's Bimmer M42 > Getrag > T-bird IRS Haynes Roadster |
MV8: I had similar thoughts but there is very limited room. I might leave it as is to do an auto-x or 2 then beef them up before final install. |
Author: | Mnot [ July 5, 2019, 4:51 pm ] |
Post subject: | Re: MNot's Bimmer M42 > Getrag > T-bird IRS Haynes Roadster |
I am working on the interior panels as I am preparing for my first auto-x in Concord, NC on July 20th. I have created the templates and I am ready to cut the Al but I was wondering if using rivnuts instead of rivets would be okay for the rear bulkhead. I was thinking of using steel M5 rivnuts with button head screws every 8-10 inches or so. I am thinking this for 2 reasons: 1. The chassis isn't complete yet so I will need to remove the bulkhead to finish weld and paint 2. I am sure i have managed to paint myself in a corner somehow that requires access through the bulkhead but i haven't identified it yet Your thoughts? |
Author: | Mnot [ July 16, 2019, 11:08 pm ] |
Post subject: | Re: MNot's Bimmer M42 > Getrag > T-bird IRS Haynes Roadster |
I have been working frantically to get the car ready for the autocross this weekend. It is an SCCA sanctioned club and I never heard back from them as to whether or not I need a roll bar. So..... Attachment: IMG_2685v2.JPG
|
Author: | GonzoRacer [ July 17, 2019, 7:25 am ] |
Post subject: | Re: MNot's Bimmer M42 > Getrag > T-bird IRS Haynes Roadster |
I haven't checked the SCCA rules in a while, but Solo (autocross) did not require a roll bar for open cars as of a couple of years ago. It's not a bad thing to have one though, and if you go much higher in the racing world, you're going to need one any way. Good luck on Sunday! JDK |
Page 30 of 52 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |