<Martin-- just sent you a PM on that adapter...>
11-11-2018 (Thank you Veterans
)
Time to open diff #3 from this auto wrecker, the company that tells me they definitely have a Torsen type rear end for a 1996-2005 Toyota Rav4.. No, no they don't have it, and neither do I
I'm going to stop chasing this particular part, at least for now.. it's taking too much of my energy, and now I'm frustrated, and I can be a real d*ck when I get frustrated, and I don't want to be that.. So in the short term, I'm going to build these cars with an open diff, and maybe when I'm over myself I'll try again to chase down a Torsen Rav4 diff.. onward..
While I'm doing all of this work at the rear of the car, I thought I'd go ahead and try to integrate an electric reverse.. reverse in a BEC is something that trips up a lot of builders (it certainly did me on the N600 build), so I thought I'd just blatantly steal Martin's idea and use a small block Chevy starter and a 77 tooth starter ring off of a 1970's Ski-Doo snowmobile.. For now I'm just trying to make everything fit in the available space, and once all bolted up, cross my fingers that it works as well for me as it has for Martin..
**Martin's (mgkluft) electric reverse video:
https://www.youtube.com/watch?v=TdObULc ... e=youtu.beLike everything else on this tiny car, the clearances to make this happen are tight.. the little chunk on the diff had to be ground off to clear the starter body..
--ccrunner
_________________
Dean
1972 Honda N600 Restomod "ccrunner's N600 VFR800 repower"
1963 Volvo P1800 Restomod
http://locostusa.com/forums/viewtopic.php?f=36&t=163091959 Berkeley SE492 Restomod...
viewtopic.php?f=36&t=19397"ccrunner's 1960 MGA coupe Restomod" found on MGExp.com