| LocostUSA.com http://www.locostusa.com/forums/ |
|
| evo's V6 Vq30de Nissan Middy +442 build http://www.locostusa.com/forums/viewtopic.php?f=36&t=4082 |
Page 21 of 21 |
| Author: | evo626 [ February 26, 2017, 10:29 am ] |
| Post subject: | Re: evo's V6 Vq30de Nissan Middy +442 build |
The metal heater shroud didn't workout as planned. It was far to heavy and oversized I made a plastic cover with a 3in outlet. It fits in the passenger side footwell and doesn't look bad either. Needs some ducting from the outside of the car. Fan maybe overkill lol.    Evo |
|
| Author: | evo626 [ February 26, 2017, 2:17 pm ] |
| Post subject: | Re: evo's V6 Vq30de Nissan Middy +442 build |
 Here it is in its mounted position. I've been working on this for a long while and overall it meets all of my requirements. Thin and cheap. I was happy to build it out of parts I already have. Evo |
|
| Author: | egoman [ February 26, 2017, 2:32 pm ] |
| Post subject: | Re: evo's V6 Vq30de Nissan Middy +442 build |
As a plumber I recognize that outlet, I will let you tell everyone what it is. |
|
| Author: | KB58 [ February 26, 2017, 3:02 pm ] |
| Post subject: | Re: evo's V6 Vq30de Nissan Middy +442 build |
Hint: it's intended for a room in which you can sit and ponder. |
|
| Author: | evo626 [ February 26, 2017, 4:07 pm ] |
| Post subject: | Re: evo's V6 Vq30de Nissan Middy +442 build |
KB58 wrote: Hint: it's intended for a room in which you can sit and ponder. You found my "office" of inspiration...  Evo |
|
| Author: | evo626 [ July 3, 2017, 4:36 pm ] |
| Post subject: | Re: evo's V6 Vq30de Nissan Middy +442 build |
Lots of little updates. The car now has headlights and turn signals. Turn signals are a dual filament from a harley and headlights are 5 3/4 jobbers. I'm working on reducing the rear shock mounts as they weren't adjusted for droop correctly, no pictures yet. Next I'm moving the battery to the engine bay to make room for my new heater. I brought a zirgo golbi heater from newegg for $65 with shipping. It's very compact and will live where the battery was mounted under the scuttle. Also mounted the horns and added an x brace to the front of the chassis.Progress has been slow but I haven't given up. Still get an hour or two a week to work on it. Also added a clutch pedal which was made from a modified s2000 assembly. Headlights  Clutch pedal  Upper fuel tank firewall door.  Zirgo heater  Evo |
|
| Author: | evo626 [ July 3, 2017, 7:48 pm ] |
| Post subject: | Re: evo's V6 Vq30de Nissan Middy +442 build |
Another headlight pic. Lower bracket was a made from 3 pieces. Speed holes for lightness.  Front brace and horns.  Upper firewall.  Fuel filler access door.  Zirgo heater side. 
|
|
| Author: | pancake [ June 29, 2019, 11:17 pm ] |
| Post subject: | Re: evo's V6 Vq30de Nissan Middy +442 build |
Finished reading from the beginning. Any more updates? |
|
| Page 21 of 21 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|