LocostUSA.com
http://www.locostusa.com/forums/

Wanted, Pat Prince frame drawing, Sheet 2
http://www.locostusa.com/forums/viewtopic.php?f=39&t=19825		 Page 1 of 1
Author:  stuie84 [ June 19, 2019, 9:04 am ]
Post subject:  Wanted, Pat Prince frame drawing, Sheet 2
This posting goes back a while, SKOU had posted a series of Pat Prince Drawing with the exception of sheet 2 do to the file size.

I PM'd him recently but haven't received a reply. I'm hoping a locoster or 2 will have the drawings?

This is the original Post
https://www.locostusa.com/forums/viewtopic.php?f=39&t=11691
Author:  SkinnyG [ June 19, 2019, 10:53 am ]
Post subject:  Re: Wanted, Pat Prince frame drawing, Sheet 2
Drawing #2 is 5.5M big, and a poor quality scan of an abused piece of paper that is difficult to read. It is dated 10-12-81

It contains merely a side view of the frame that tells you considerably less dimensionally than Drawing #1.

If you really really want it, PM me an email that can accept a file that big, but it is a file of disappointment. I did not use it at all when I built my "Dimensionally Correct" (yet unfinished) frame.
Author:  stuie84 [ June 20, 2019, 9:00 pm ]
Post subject:  Re: Wanted, Pat Prince frame drawing, Sheet 2
SkinnyG wrote:
Drawing #2 is 5.5M big, and a poor quality scan of an abused piece of paper that is difficult to read. It is dated 10-12-81

It contains merely a side view of the frame that tells you considerably less dimensionally than Drawing #1.

If you really really want it, PM me an email that can accept a file that big, but it is a file of disappointment. I did not use it at all when I built my "Dimensionally Correct" (yet unfinished) frame.


SkinnyG, I got the file thank you very much.!

:cheers:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/