LocostUSA.com

Learning how to build Lotus Seven replicas...together!
It is currently November 18, 2017, 9:56 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: November 8, 2017, 8:35 am 
Offline

Joined: October 10, 2010, 8:24 pm
Posts: 36
I hate to be the guy that starts projects and never finishes them but life always seems to get in the way for me. Basically I have almost everything you need to put a duratec into whatever project you have. I was going to put one in an Mgb, but this stuff would easily work as well in a seven. I have 2 engines, one 2.0 and one 2.5. The 2.5 needs the front cover changed, I have everything needed to do that. For fuel I have a kit from danst engineering from England. 40mm bike Carbs sonically cleaned, manifold, pipercross filter, and throttle cable kit. If you want to go fuel injected I have a set of gsxr750 carbs that fits the same manifold. I was going to use megajolt for ignition so I had bought a Ford edis with plug wires. You can use this stuff if you use megasquirt also. I have an nc miata alternator, and also a small Suzuki alternator with a lightweight pully if you want to use a 3 wire system. Just need to make a mount for it. Transmission is a 2009 nc miata 5 speed. Mates right up to either engine. If the engine is upright the transmission will tilt 10 degrees to the driver. This can be delt with with a bent shifter or just left alone. 10 degrees isn't a big deal. Look at the list for everything else I have. Ask any questions you may have. I would like to sell this in the biggest chunks I can, if someone wanted it all I would def discount. Basically to have a Complete drivetrain the only other things you need is an nc miata flywheel and clutch. If I don't have price listed on item make an offer. Let me know if the pic link doesn't work, I haven't done this in a while


-Ford edis and plug wires
-Crane cams titanium springs 260
-Arp pressure plate bolts
-Massive balance shaft delete
-Massive timing tools
-Arp crank pully bolt
-Injector plugs
-nc Miata oil pickup tube
-Top gasket kit
-Crank pully diamond washers
-Crankshaft front seal
-Engine mounting kit for RWD Motorsport 100
-Nc miata oil pan 100
-Focus oil pan
-Ranger oil pan
-2.5 front cover
-Nc miata 5 speed 400
-Fusion 2.5 engine 500
-Focus 2.0 engine 300
-Lightweight Alternator pully with 3 wire Suzuki alternator 90
-Motorcycle carb kit from DanST engineering 600
-S2000 headers with flange cut off 75
-Gsxr 750 throttle bodies 100
-Steel exhaust flange and gasket 100
-Injector rail bar stock
-Vacuum manifold

https://imgur.com/a/Xhqvg


Top
 Profile  
Reply with quote  
PostPosted: November 8, 2017, 5:40 pm 
Offline
User avatar

Joined: April 26, 2008, 6:06 pm
Posts: 2869
Location: Under the weather. (Seattle)
Location?

_________________
-Justin

Also follow my build on blogspot, tumblr, or instagram and twitter (GarageOdyssey)


Top
 Profile  
Reply with quote  
PostPosted: November 8, 2017, 7:21 pm 
Offline

Joined: October 10, 2010, 8:24 pm
Posts: 36
Sorry, I'm located in upstate South Carolina. Spartanburg to be exact.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
POWERED_BY