LocostUSA.com

I bought the engine which includes the harness.

Different harness Tom; you wanted the R1 harness that was spliced. Abid is interested in the Rebel Wiring harness that was listed as another item.

_________________
"There are in fact two things, science and opinion the former begets knowledge, the latter ignorance." ~Hippocrates (460-377 BC)

Sorry my mistake,I'd forgotten about the aftermarket harness.

Thanks Mike,
Was nice meeting and talking with you and hopefully I can keep picking up ideas and information from you.

Abid

Did the exhaust manifold go with the engine? I'd also need to figure out if the '07 - '07 has the same spacing and port size as your engine.

_________________
.. in the world

Likewise Abid. I haven't gotten around to pulling the other seat yet, but I'll let you know when I do. Hopefully those parts will help you make more progress to get it on the road. Be sure to bring it by once it is!

Cheers,
Mike

_________________
"There are in fact two things, science and opinion the former begets knowledge, the latter ignorance." ~Hippocrates (460-377 BC)

Unfortunately it will be going with the engine. The manifold was cut and modified to exit 90 instead of under the engine. There wasn't enough room for a 4-2-1 so I had to just go 4-1 but it still turned out fairly well.

Best of luck finding your parts!

Cheers,
Mike

_________________
"There are in fact two things, science and opinion the former begets knowledge, the latter ignorance." ~Hippocrates (460-377 BC)

No rush Mike,
Whenever you can pull the seat is fine. Let me know when you have it out and we can work out when we can meet around your workplace.

Thanks,
Abid

Thanks for the info. My build will also be locating the engine along the same axis so your manifold would have been a great fit. I will probably have to fab one; I was just hoping to save a bit of work.

_________________
.. in the world

Mike,
I'm in need of the steering rack for a cobra project I'm building.
I'm in Houston, Texas.
c d e s a u l o s @ g m a i l . c o m

Thanks,
Curtis

Mike,

I am interested in the wilwood reverse pedal mount set up if you have not sold it yet.
PM me or you can email me: mjalaly at yahoo.com

thanks!

_________________
My build: http://www.locostusa.com/forums/viewtop ... 18&t=13096


You can build the most awesome thing in the world but at some point, an 80yr old man in a crx is probably going kick your butt on the track... don't ask me how I know.

Hey Mike-

Sorry to hear about your life changes.. you seem to have a great attitude about it though- and that's 95% of how we get through..

I might have missed it, but do you still have the speedo healer? Is it R1 specific, or a generic splice-in unit?-- finally, if it's generic and still available, what would you like for it shipped to 93312 (central CA)?

Thanks, and best of luck to you

ccrunner

_________________
Dean

1972 Honda N600 Restomod "ccrunner's N600 VFR800 repower"

1963 Volvo P1800 Restomod
http://locostusa.com/forums/viewtopic.php?f=36&t=16309

1959 Berkeley SE492 Restomod...
viewtopic.php?f=36&t=19397

"ccrunner's 1960 MGA coupe Restomod" found on MGExp.com

Hey there. If you could fire an email to andrew . funston at gmail.com that'd be awesome. I have a few parts I'm interested in.