| LocostUSA.com http://www.locostusa.com/forums/ |
|
| Header for BEC R-1 build. http://www.locostusa.com/forums/viewtopic.php?f=40&t=18842 |
Page 1 of 1 |
| Author: | w650gb500 [ April 12, 2017, 7:46 am ] |
| Post subject: | Header for BEC R-1 build. |
I purchased a project car last year which was intended to be Yamaha R-1 powered and based on Gibbs chassis dimensions. I ended up not building it and upon reselling it, the new owner had no intension of using the motorcycle powerplant, so I retained the header for a possible future project. Well, I'm cleaning up the shelving at the shop and came across this header and really don't see much use for it in its current configuration. If somebody is moving forward with a bike powered build and it is by chance a Yamaha R-1, this might be for you. The quality of craftsmanship and TIG welding is superb. $200 plus shipping from zip 18612. Link to build log. Pictures are on page 4. |
|
| Author: | w650gb500 [ September 6, 2018, 9:54 am ] |
| Post subject: | Re: Header for BEC R-1 build. |
*** BUMP *** Found this boxed-up and sitting on a shelf while cleaning up the shop. Anybody? |
|
| Author: | trialsmangasgas [ September 6, 2018, 10:02 am ] |
| Post subject: | Re: Header for BEC R-1 build. |
Man that is a bargain. Some one jump on this |
|
| Author: | APinSoFl [ September 6, 2018, 7:50 pm ] |
| Post subject: | Re: Header for BEC R-1 build. |
What years R1 does it fit? AP |
|
| Author: | w650gb500 [ September 6, 2018, 9:08 pm ] |
| Post subject: | Re: Header for BEC R-1 build. |
2002. Here is a link to the original builders thread. Go to page 4 to see the header build process nd welding. http://www.locostusa.com/forums/viewtop ... 35&t=13733 |
|
| Author: | w650gb500 [ December 15, 2018, 10:52 am ] |
| Post subject: | Re: Header for BEC R-1 build. |
Still here, wrapped-up, boxed-up and sitting on the shelf waiting to be shipped. |
|
| Author: | B85 [ December 15, 2018, 12:03 pm ] |
| Post subject: | Re: Header for BEC R-1 build. |
That is a great price ! Reminds me of something ?? |
|
| Author: | Eurofixer [ December 16, 2018, 6:36 pm ] |
| Post subject: | Re: Header for BEC R-1 build. |
I will take this from you but I can’t PM yet as this is my first post. I’m not sure if I can receive a PM, if I can feel free to send one and I’ll send the funds your way. |
|
| Author: | Eurofixer [ December 30, 2018, 4:28 pm ] |
| Post subject: | Re: Header for BEC R-1 build. |
Still really interested if you have this available. |
|
| Author: | w650gb500 [ December 31, 2018, 10:32 pm ] |
| Post subject: | Re: Header for BEC R-1 build. |
I had sent an email to the address in your profile. I can be reached at w650gb500-at-gmail-dot-com. |
|
| Author: | w650gb500 [ February 17, 2020, 9:27 pm ] |
| Post subject: | Re: Header for BEC R-1 build. |
For anyone building with an R1 motor, I still have this header. Here are the pix. |
|
| Author: | w650gb500 [ February 17, 2020, 9:29 pm ] |
| Post subject: | Re: Header for BEC R-1 build. |
More pix |
|
| Author: | TooBusy [ February 18, 2020, 10:14 am ] |
| Post subject: | Re: Header for BEC R-1 build. |
I don't have an R1 build going, but those headers are SWWEEEEET |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|