LocostUSA.com
http://www.locostusa.com/forums/

SK 48 side draft carbs
http://www.locostusa.com/forums/viewtopic.php?f=40&t=19432
Page 1 of 1

Author:  w650gb500 [ June 10, 2018, 4:15 pm ]
Post subject:  SK 48 side draft carbs

I bought these some time ago for a Toyota powered project that eventually went to fuel injection, so it’s time to clean out some unused parts

SK 48 carbs are a continuation of the Mikuni PHH series and very similar to a Weber DCOE.

What you see is what will be shipped. 2 carbs with air horns, spare venturies(40,41 &43) and a few misc pieces parts.

I do not have specs on carb internals, but will have them mid-week and update this post ASAP.

$500 plus shipping from zip 18743.

Author:  w650gb500 [ July 9, 2018, 10:01 pm ]
Post subject:  Re: SK 48 side draft carbs

I had some questions about what is inside the carbs, so here it is.

- 43mm venturis, stamped 4743.
- 190 air correctors
- F16 emulsion tubes
- 165 fuel jet
- F855 idle jet

There is also an aluminum insert in the fuel chamber on the side opposite the float pivot. It is removable and looks like it would prevent fuel sloshing(maybe). I’ve never seen one, but maybe it’s a common piece that you guys are familiar with. If so, please let me know.

Author:  w650gb500 [ September 10, 2018, 9:57 am ]
Post subject:  Re: SK 48 side draft carbs

Price reduced to $400 plus actual shipping.

Author:  2mAn [ September 28, 2018, 1:43 pm ]
Post subject:  Re: SK 48 side draft carbs

PM sent

Author:  w650gb500 [ October 2, 2018, 9:32 am ]
Post subject:  Re: SK 48 side draft carbs

Still available. Wrapped-up, boxed-up, sitting on a shelf and ready to ship.

Author:  w650gb500 [ May 29, 2019, 6:15 pm ]
Post subject:  Re: SK 48 side draft carbs

*BUMP* for a nice set of dual carbs.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/