Locost McSorley 442E Rolling chassis to build a Lotus 7 Replica.
$1700 OBOI purchased the frame from Kevin Brister and did not do much with it other than buy more parts. The transmission tunnel was partially cut out when he was going to go a different route than a rotary engine, that part of the frame is still present and can be re-welded, or adapted for your drivetrain.
Includes everything pictured, here are a few highlights:
- Speedway Motors upper control arms
- Mustang II based front brakes and spindles
- 2x Mazda 13B rotary transmissions
- QA1 single adjustable front shocks
- Aluminum seats – cut to be low back more vintage look, have the top part if desired to make full back.
- Aldan American single Adjustable rear shocks
- Dana 35 Rear axle (wrangler) with disc brakes (grand Cherokee)
- Spare 4.11 gear set
- New Aluminum Radiator
- New Keep It Clean wiring harness for lights, turn signals, main power distribution)
- Spare steel for the frame
- Wilwood steering rack
- Mustang Wheels w/ old tires (would want to replace tires once driving)
Not pictured I have a pile of receipts and other documentation as well.
For more pictures:
https://flic.kr/s/aHsmPxF26vLocated in Tucson Arizona