| LocostUSA.com http://www.locostusa.com/forums/ |
|
| 79 to 94 Mustang spindle model and drawing http://www.locostusa.com/forums/viewtopic.php?f=5&t=18930 |
Page 1 of 1 |
| Author: | stuie84 [ June 14, 2017, 8:52 pm ] |
| Post subject: | 79 to 94 Mustang spindle model and drawing |
this is a simplified model for anyone interested of a 79-to 94 mustang spindle with the factory 5 upper ball joint adapter assumed into the model. It is only ball joint to ball joint with the spindle axis and tie rod location. The Zip contains step files of the driver and passenger side and a dimensional PDF Note: this is a very basic model focusing on the suspension geometry. The FF5 adapter was not modeled in. the low ball is the off the shelf press in mustang ball. the upper is the k772 chrysler threaded ball. I have not yet added in the wheel face of the brake rotor. Attachment: zip.zip
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|