So I am in the process of ordering new custom adjustable bilsteins (my car seems to be too light in the front to buy anything off the shelf). What i am having issue with is making a graph of what I want Bilstein to make.
Using this cacualtor
http://farnorthracing.com/autocross_secrets16.htmlThis is what I have but what values do you guys think would be fitting for Tire spring (its hard to measure), design Dampening ratio and digressive knee?
Attachment:
Capture.JPG
My front spring rate is off since my front shocks are really over damped and I would think it should be closer to 125lbs. The rears are not too bad.
* Most spring calculators assume you don't have push rod supension.
http://www.ridetech.com/info/wp-content ... ulator.xlsI actually did this for the other car I was working and the driver ended up using a very slow rebound (2 click out of 10) because he thought it was too harsh. I think it is great.
Here is what i get if I use the built in Tire spring rate, design Dampening ratio and digressive knee
Attachment:
data 1.JPG
Attachment:
data2.JPG