LocostUSA.com

I've got a bunch of pictures and a slightly different assembly method in my build log:

http://www.locostusa.com/forums/viewtop ... 1&start=74


Thanks, Jack!

-dave

_________________
...nowadays people are so intellectually lazy and lethargic that they can't build ANYTHING with their hands. They'll spend hours watching whiny people marooned on an island, but won't spend a second adding anything to the world. -weconway
Visit my [Locost 7 build log]

This is a great old thread. I bookmarked it years ago, planning to use it on my build. I'm going to bump it for newer builders as it gives an inexpensive, easy way to prototype control arms before committing to metal. Note a link to a slightly different use of the method in the posting just above.

In my case, I ended up using circle track uppers, which are 5/8" threads, and the lower is a screw-in ball joint ring, which will require welded control arms.

I wonder if this method could be adapted to 5/8" threads?

Cheers,

_________________
Damn! That front slip angle is way too large and the Ackerman is just a muddle.

Build Log: viewtopic.php?f=35&t=5886

I had the same desire for mocking my front suspension and ended up buying some 7/8" pine dowel (I think it was around $4.50 for a 4 or 5' stick) from Home Depot. SUPER fast to cut, drill, and tap... as in just a few minutes. Worked perfectly for my needs.

_________________
Peace, Ron

...

_________________
Peace, Ron

@RTz

Very nice, and Locost, solution, Ron.

Cheers,

_________________
Damn! That front slip angle is way too large and the Ackerman is just a muddle.

Build Log: viewtopic.php?f=35&t=5886