I have posted two new articles on my website about how I corrected my CMC built front suspension.
If you have a RX-7 based CMC chassis (and perhaps a Toyota based one), you will probably find these articles useful.
I've corrected the camber in bump/dive, bump steer, steering ratio and Ackermann with two rather simple changes without any bracket or rack/pinion relocation.
Other than some grinding on the steering arm, I made no changes to any of the existing parts.
This might also give you an idea of how to speed up your steering without changing the rack & pinion you are now using.
You can find the articles in the "Links" area on my site at,
http://home.comcast.net/~olrowdy_01/
Or click on "WWW" below.
_________________
"My junk is organized. At least is was when I put it wherever it is." -olrowdy
Completed building GSXR1000 CMC7, "Locouki"
Website:
http://projekt.com/locouki/