LocostUSA.com

Learning how to build Lotus Seven replicas...together!
It is currently Wed Aug 20, 2014 2:30 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 171 posts ]  Go to page 1, 2, 3, 4, 5 ... 12  Next
Author Message
PostPosted: Tue Aug 23, 2011 3:36 pm 
Offline

Joined: Tue Aug 23, 2011 6:29 am
Posts: 89
Добрый день Всем! Хочу рассказать за постройку Лотус 7 на Украине, город Одесса.
Проект начат в 2010 году.
За несколько лет теоретической подготовки знаю, что хочу увидеть на финише и более менее план набросал.
С рамой сложностей не испытал, имел опыт приличный, работал сварщиком на заводе VOLVO
Надеюсь на интерес к моему проекту и общению

Good day everyone! I want to tell you about the construction of the Lotus 7 in the Ukraine city of Odessa.
The project started in 2010.
A few years theoretical training know that I want to see the finish line and more than a plan sketched out.
With the frame complexity is not experienced, had a decent experience. worked as a welder at the plant.
I hope the interest in my project and communicate .


Attachments:
030.jpg
030.jpg [ 261.6 KiB | Viewed 4056 times ]
015.jpg
015.jpg [ 223.22 KiB | Viewed 4056 times ]
003.jpg
003.jpg [ 334.76 KiB | Viewed 4056 times ]
File comment: Since this all started
001.jpg
001.jpg [ 372.55 KiB | Viewed 4056 times ]

_________________
http://www.youtube.com/watch?v=rbjV0SHh ... 4DD126786F


Last edited by Odessa on Mon Sep 05, 2011 2:30 pm, edited 1 time in total.
Top
 Profile  
 
PostPosted: Tue Aug 23, 2011 7:50 pm 
Offline
User avatar

Joined: Sat Mar 19, 2011 10:22 am
Posts: 546
Location: Holden, Alberta, Canada
Добрый день yourself!

What kind of donor car are you using?

_________________
Perry

2 down, 2 to go

'If man built it, man can fix it'

"No one ever told me I couldn't do it."

http://www.locostusa.com/forums/viewtopic.php?f=35&t=12234

http://www.locostusa.com/forums/viewtopic.php?f=35&t=14030


Top
 Profile  
 
PostPosted: Tue Aug 23, 2011 9:14 pm 
Offline
Man of Constant Hazard
User avatar

Joined: Mon Feb 20, 2006 11:18 am
Posts: 3070
Location: Lexington, KY
Добрый день Всем!

Can't wait to see more!

-dave

_________________
...nowadays people are so intellectually lazy and lethargic that they can't build ANYTHING with their hands. They'll spend hours watching whiny people marooned on an island, but won't spend a second adding anything to the world. -weconway
Visit my [Locost 7 build log]


Top
 Profile  
 
PostPosted: Tue Aug 23, 2011 10:00 pm 
Offline
User avatar

Joined: Wed Mar 30, 2011 7:18 am
Posts: 454
Location: central Arkansas
What will you be using for the donor?

Looking good so far!


Top
 Profile  
 
PostPosted: Tue Aug 23, 2011 10:15 pm 
Offline
We are Slotus!
User avatar

Joined: Tue Oct 06, 2009 9:29 am
Posts: 4990
Location: Tallahassee, FL (The Center of the Known Universe)
Welcome to the group! Your build looks good so far, keep up the good work, and keep sending us updates! Thanks for sharing your build with us.

JDK

_________________
JD, father of Quinn, Son of a... Build Log
Quinn the Slotus:Ford 302 Powered, Mallock-Inspired, Tube Frame, Hillclimb Special
"Gonzo and friends: Last night must have been quite a night. Camelot moments, mechanical marvels, Rustoleum launches, flying squirrels, fru-fru tea cuppers, V8 envy, Ensure catch cans -- and it wasn't even a full moon." -- SeattleTom


Top
 Profile  
 
PostPosted: Wed Aug 24, 2011 1:00 am 
Offline
User avatar

Joined: Tue May 19, 2009 11:59 pm
Posts: 102
Location: Montreal, Canada
[quote="Odessa"]Добрый день Всем! Хочу рассказать за постройку Лотус 7 на Украине, город Одесса.
Проект начат в 2010 году.
За несколько лет теоретической подготовки знаю, что хочу увидеть на финише и более менее план набросал.
С рамой сложностей не испытал, имел опыт приличный, работал сварщиком на заводе VOLVO
Надеюсь на интерес к моему проекту и общению
(end quote\)

Слухай друже
Ти не будуєш Льотус Севен , на твої картині
це Льокост.
Я маю досвідченя в тім проекті і допоможу
якщо будеш писати державною, а не кацапскою мовою
Евген
Ewhen


Attachments:
LOTBEST.JPG
LOTBEST.JPG [ 306.16 KiB | Viewed 3998 times ]
Top
 Profile  
 
PostPosted: Wed Aug 24, 2011 1:03 am 
Offline
User avatar

Joined: Sat May 07, 2011 8:39 pm
Posts: 508
Location: new zealand
привет хороший автомобиль помощника .. приветствует то, что включает ваш автомобиль? .. man my Russian sucks anyway welcome ..it is looking good so far
what motor and drive train are you going to use ?

_________________
I USE TO HAVE AN OPEN MIND ..BUT MY BRAINS KEPT FALLING OUT


Last edited by laserracer on Wed Aug 24, 2011 6:55 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Wed Aug 24, 2011 1:14 am 
Offline
The voice of reason
User avatar

Joined: Thu Jan 10, 2008 4:47 pm
Posts: 5573
Location: Massachusetts
I will keep it simple - :cheers:

I hope your project goes well, we look forward to seeing more.

_________________
Marcus Barrow - Car9 an open design community supported sports car for home builders!
SketchUp collection for LocostUSA: "Dream it, Build it, Drive it!"
Car9 Roadster information - models, drawings, resources etc.


Top
 Profile  
 
PostPosted: Wed Aug 24, 2011 7:01 am 
Offline

Joined: Tue Aug 23, 2011 6:29 am
Posts: 89
Спасибо за горячий приём и интерес. С радостью расскажу всё, что сделал до сегодняшнего дня и покажу на фото.
Я использую новые детали от автомобиля ВАЗ. Донор не покупал, в Украине старые машины дорого и плохие.
Книгу использовал Рон Чампион но делаю немного изменений. Двигатель ВАЗ 2104, 1500 см 3 и оминальная
мощность двигателя при частоте вращения коленчатого вала 5000 об/мин,: 50,0 кВт.- (68,0 л.с.) Мощность небольшая но можно доработать и поднять до 120 л.с. Хочу сделать машину лёгкую для хорошей скорости. Когда строю узнаю много нового, интересного.
Чтоб сделать передние рычаги сделал кондуктор. С заднего моста срезал все крепления и сделаю свои. Задняя панель из алюминия 3 мм. Много сил ушло когда делал панель.

Thank you for your warm welcome and interest. We are pleased to tell you all that he had done to date and show the photo.
I'm using the new parts of the VAZ. Donor did not buy, in Ukraine the old machine is expensive and bad.
Ron Champion book used but make a few changes. Engine VAZ 2104, 1500 cm 3 and a nominal power of the engine at cranking speed 5000 r / min: 50,0 kW .- (68.0 hp) Power a small but can be modified and up to 120 hp I want to make the car easy for a good speed. When the ranks learn many new, interesting.
To make the front levers made ​​jig. On the rear axle cut all the fixtures and make your own. Rear panel made ​​of aluminum of 3 mm. Much effort went when I did the panel.


Attachments:
033.jpg
033.jpg [ 194.95 KiB | Viewed 3863 times ]
062.jpg
062.jpg [ 276.08 KiB | Viewed 3968 times ]
063.jpg
063.jpg [ 258.83 KiB | Viewed 3968 times ]
068.jpg
068.jpg [ 314.46 KiB | Viewed 3968 times ]
066.jpg
066.jpg [ 350.03 KiB | Viewed 3968 times ]
064.jpg
064.jpg [ 355.28 KiB | Viewed 3968 times ]
0122.jpg
0122.jpg [ 309.53 KiB | Viewed 3968 times ]

_________________
http://www.youtube.com/watch?v=rbjV0SHh ... 4DD126786F


Last edited by Odessa on Thu Aug 25, 2011 1:32 pm, edited 1 time in total.
Top
 Profile  
 
PostPosted: Wed Aug 24, 2011 7:28 am 
Offline

Joined: Tue Aug 23, 2011 6:29 am
Posts: 89
Ewhen hello, Я нормально говорю и на украинском и на русском но Одесса город многонациональный и все говорят на русском. Я очень плохо знаю английский язык и поэтому пишу на двух языках, может если не понятен мой английский смогут перевести с оригинала.
Я с удовольствием познакомлюсь и пообщаюсь мой майл viziter2006@yahoo.com

_________________
http://www.youtube.com/watch?v=rbjV0SHh ... 4DD126786F


Top
 Profile  
 
PostPosted: Wed Aug 24, 2011 8:53 am 
Offline

Joined: Tue Apr 12, 2011 8:03 pm
Posts: 34
This will be enjoyable to follow your progress! I also like to read English Russia, the cars that people build there are amazing.
Nice workshop decor!
What kind of welding are you doing?


Top
 Profile  
 
PostPosted: Wed Aug 24, 2011 10:17 am 
Offline
The voice of reason
User avatar

Joined: Thu Jan 10, 2008 4:47 pm
Posts: 5573
Location: Massachusetts
Good welding! Nice job on front levers...

_________________
Marcus Barrow - Car9 an open design community supported sports car for home builders!
SketchUp collection for LocostUSA: "Dream it, Build it, Drive it!"
Car9 Roadster information - models, drawings, resources etc.


Top
 Profile  
 
PostPosted: Wed Aug 24, 2011 4:59 pm 
Offline

Joined: Tue Aug 23, 2011 6:29 am
Posts: 89
Nice workshop decor! :D
Это гараж в котором ставлю машину., Для работы сделал стол с колёсами, ставил под стенку и заезжал машиной. Мне нравятся ваши гаражи, много инструмента, станки
Я сейчас работаю водителем и строю мечту вечерами и выходной день.

This is a garage where I put the car., For he made the table with wheels, placed under the wall and dropped in the machine. I like your garage, a lot of tools, machines
I am working on a driver and build a dream on evenings and weekends.



What kind of welding are you doing?
I use carbon dioxide welding. ( correctly understood the question? )

_________________
http://www.youtube.com/watch?v=rbjV0SHh ... 4DD126786F


Top
 Profile  
 
PostPosted: Wed Aug 24, 2011 5:08 pm 
Offline
Mid-Engined Maniac

Joined: Sun Apr 23, 2006 8:26 pm
Posts: 4827
Location: SoCal
Yeah that top picture makes it look like it's being built in his daughter's bedroom, lol.

_________________
Midlana book: Build this mid-engine Locost!, http://www.midlana.com/
Kimini book: Designing mid-engine cars using FWD drivetrains, http://www.kimini.com/book_info/


Top
 Profile  
 
PostPosted: Wed Aug 24, 2011 5:16 pm 
Offline

Joined: Tue Aug 23, 2011 6:29 am
Posts: 89
Евген, Це твій локост? Дуже добре виглядає і бачу що потужний двигун. Підкажи будь ласка в чому різниця між лотус і локост.

_________________
http://www.youtube.com/watch?v=rbjV0SHh ... 4DD126786F


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 171 posts ]  Go to page 1, 2, 3, 4, 5 ... 12  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Trochu and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
POWERED_BY