LocostUSA.com

Learning how to build Lotus Seven replicas...together!
It is currently March 28, 2024, 7:59 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 18 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Cleco Fasteners
PostPosted: October 20, 2011, 9:25 am 
Offline

Joined: August 18, 2011, 10:19 pm
Posts: 47
I have question about the use of Cleco fasteners
Basically, don't see any advantage over just using 1/4" self drill sheet metal screws
Clecos will work great for sheet metal butt welds applications

Clecos:
expensive
seem awkward to use.
1.drill the hole
2.load the tool & place holder
I suppose they look cool in build pics

Screw
1.Cheep
2.drill, fasten ...done

.....Just Askin...


Top
 Profile  
Reply with quote  
 Post subject: Re: Cleco Fasteners
PostPosted: October 20, 2011, 10:00 am 
Offline
Locostering Legend
User avatar

Joined: December 27, 2005, 8:13 pm
Posts: 787
I'm not sure what your intended use of Clecos is, but they are normally used to temporarily fasten/align panels before riveting. They won't damage the rivet holes as screws would.

I have used a few as removable fasteners in hidden places like inside the nosecone. They stay tighter than screws which can work loose.


Top
 Profile  
Reply with quote  
 Post subject: Re: Cleco Fasteners
PostPosted: October 20, 2011, 5:44 pm 
Offline

Joined: October 8, 2011, 3:53 pm
Posts: 109
Location: Niagara Falls, ON.
I can't see myself using clecos either, I'm sure they're a timesaver in a busy shop, but figure I'll muddle through with what I've got.

_________________
traynee rockit serjun

DD#1 '95 Ford Escort Wagon 1.9 Auto, self PnPed stage 2-3ish head, 11ish CR, Airhog panel filter, awaiting headers and intake mods. ~110-120 BDHP
DD#2 '88 Plymouth Voyager, 3.0 Auto, shift kitted, alloys, walker exhaust, timing advance. Awaiting PnP heads. ~150 BDHP


Top
 Profile  
Reply with quote  
 Post subject: Re: Cleco Fasteners
PostPosted: October 20, 2011, 7:31 pm 
Offline

Joined: June 24, 2007, 6:04 pm
Posts: 1521
Clecos are very useful, especially once you start to fabrciate the body panels.
They allow you to remove and install the panels as many times as necessary to get everything lined up right.
If you dont understand their usefullness it is because you have never used them.

Al

_________________
Super Seven 3.4


Top
 Profile  
Reply with quote  
 Post subject: Re: Cleco Fasteners
PostPosted: October 20, 2011, 8:13 pm 
Offline
User avatar

Joined: May 2, 2009, 1:03 pm
Posts: 1389
Location: The Humid State of North Carolina
raceral wrote:
Clecos are very useful, especially once you start to fabrciate the body panels.
They allow you to remove and install the panels as many times as necessary to get everything lined up right.
If you dont understand their usefullness it is because you have never used them.

Al
I have to concur with raceral.... Clecos ROCK!!!

I did several projects where I muddled through and they came out OK. Then I did a project with Clecos and it came out OK too.. it was just a lot less stressfull.. a lot neater.. lines stayed straight.. panels didn't walk.. you can remove.. fix and replace without losing accuracy.. and the best part.. it took less time! I'll never be without them again!! The work was only OK due to my level of expertise in metal fabrication.. and using clecos even helped that out!

It has nothing to do with the work load of the shop. It has everything to do with the fit and finish of the product. Screws are OK, but they have limitations and negatives.

Do you need them?? NO. Should you have them?? Oh Yeah!!!

Cheers!

KS

_________________
Check out Firearm Finishes & Coating for options to ceramic coat your Locost parts. Hundreds of stock or custom colors including Chrome and Clear Coating options now available! High Temp options for hot bits!! Plastics too!!

Never become a pessimist. A pessimist is correct oftener than an optimist, but an optimist has more fun, and neither can stop the march of events.-Robert A. Heinlein


Top
 Profile  
Reply with quote  
 Post subject: Re: Cleco Fasteners
PostPosted: October 20, 2011, 8:50 pm 
Offline
Always Moore!
User avatar

Joined: November 9, 2007, 3:40 pm
Posts: 4074
Location: Pittsburgh, PA
They fall into that category of tool that once you have you will wonder how you ever did without. The HF cleco pliers are pretty cheap and if you shop around 1/8" clecos can be had for less than $0.50 a piece last time I checked.

_________________
-Andrew
Build Log
Youtube


Top
 Profile  
Reply with quote  
 Post subject: Re: Cleco Fasteners
PostPosted: October 20, 2011, 8:55 pm 
Offline
User avatar

Joined: May 2, 2009, 1:03 pm
Posts: 1389
Location: The Humid State of North Carolina
a.moore wrote:
They fall into that category of tool that once you have you will wonder how you ever did without. The HF cleco pliers are pretty cheap and if you shop around 1/8" clecos can be had for less than $0.50 a piece last time I checked.
eBurn.. you can find a set (Pliers and 25 Clecos) for dirt cheap.. Mine were $23 shipped! Perfect starter.. then you just wait and buy "lots" of Clecos (in different sizes too)... easy and cheap to build up a collection!

Be aware that Clecos DO wear out though, so be careful buying a huge "lot" of used. They may not be the gold mine you think you bought! This from my brother that is an Airframer in the Navy.. so he would know! He laughed at me when I told him how much I loved them... but he knew I didn't know better, so he let me off easy!

Cheers!

KS

_________________
Check out Firearm Finishes & Coating for options to ceramic coat your Locost parts. Hundreds of stock or custom colors including Chrome and Clear Coating options now available! High Temp options for hot bits!! Plastics too!!

Never become a pessimist. A pessimist is correct oftener than an optimist, but an optimist has more fun, and neither can stop the march of events.-Robert A. Heinlein


Top
 Profile  
Reply with quote  
 Post subject: Re: Cleco Fasteners
PostPosted: October 20, 2011, 9:19 pm 
Offline
User avatar

Joined: December 17, 2010, 1:24 pm
Posts: 1580
Location: Gainesville, Mo.
Quote:
Screw
1.Cheep
2.drill, fasten ...done


If you use "tek-screws", you can leave out the "drill" part. They're very popular in the movie industry because they're quick & easy. The only problem with that is, the movie industry builders aren't known for building things to last. A dozen or so takes, then crash it and... "CUT!!!". No, I'll take rivets, and clecos make riveting SOOO much easier.

_________________
Mike - Read my story at http://twinlakesseven.blogspot.com/


Top
 Profile  
Reply with quote  
 Post subject: Re: Cleco Fasteners
PostPosted: October 20, 2011, 9:34 pm 
Offline
Mid-Engined Maniac

Joined: April 23, 2006, 8:26 pm
Posts: 6410
Location: SoCal
It's easy to "diss" clecos if they've never been used... try using them and then say they're no good... I bought 50 and should have bought 100. Seriously.

_________________
Midlana book: Build this mid-engine Locost!, http://midlana.com/stuff/book/
Kimini book: Designing mid-engine cars using FWD drivetrains
Both available from https://www.lulu.com/


Top
 Profile  
Reply with quote  
 Post subject: Re: Cleco Fasteners
PostPosted: October 21, 2011, 7:18 am 
Offline
User avatar

Joined: September 22, 2005, 8:12 am
Posts: 1879
Location: 4AGE in S.E. Michigan
Along the same lines look at investing in some of the small 1" Cleco side clamps. Very useful for fitting panels and the interior, plus another 100 or so home projects.
Dave W


Top
 Profile  
Reply with quote  
 Post subject: Re: Cleco Fasteners
PostPosted: October 21, 2011, 9:12 am 
Offline

Joined: August 18, 2011, 10:19 pm
Posts: 47
True! I have not used them

In my working with stock cars on high bank ovals we only used self tapping "zip screws" for the tin work assembly, then finished with rivets.
Never had any loosen up during the season. Talk about vibration, not to mention crashes.
The car was a 450HP G body , ran a 1/2 mile 20deg banked oval

We even used the zip screws for a quick repair at the track

Still think cleco are awkward (more steps)

Just my2c


Top
 Profile  
Reply with quote  
 Post subject: Re: Cleco Fasteners
PostPosted: October 21, 2011, 9:38 am 
Offline
Toyotaphobe
User avatar

Joined: April 5, 2008, 2:25 am
Posts: 4829
Location: Fort Worth, Texas
davew wrote:
Along the same lines look at investing in some of the small 1" Cleco side clamps. Very useful for fitting panels and the interior, plus another 100 or so home projects.
Dave W


I've never heard of them. Got a pic?

_________________
mobilito ergo sum
I drive therefore I am

I can explain it to you,
but I can't understand it for you.


Top
 Profile  
Reply with quote  
 Post subject: Re: Cleco Fasteners
PostPosted: October 21, 2011, 10:51 am 
Offline

Joined: July 26, 2010, 10:37 am
Posts: 752
Location: Tennessee
carguy123 wrote:
davew wrote:
Along the same lines look at investing in some of the small 1" Cleco side clamps. Very useful for fitting panels and the interior, plus another 100 or so home projects.
Dave W


I've never heard of them. Got a pic?

Check this link. http://www.yardstore.com/browse.cfm/2,425.html


Top
 Profile  
Reply with quote  
 Post subject: Re: Cleco Fasteners
PostPosted: October 21, 2011, 10:52 am 
Offline
The voice of reason
User avatar

Joined: January 10, 2008, 4:47 pm
Posts: 7652
Location: Massachusetts
Quote:
The car was a 450HP G body , ran a 1/2 mile 20deg banked oval


Kind of like a Mad Max Thunderdome... :)

_________________
Marcus Barrow - Car9 an open design community supported sports car for home builders!
SketchUp collection for LocostUSA: "Dream it, Build it, Drive it!"
Car9 Roadster information - models, drawings, resources etc.


Top
 Profile  
Reply with quote  
 Post subject: Re: Cleco Fasteners
PostPosted: October 21, 2011, 11:11 am 
Offline

Joined: August 18, 2011, 10:19 pm
Posts: 47
thats where the phrase "racin is rubbin" came from


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 18 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
POWERED_BY