Well the time has come to tear it down and part it off.
After a divorce and moving to another smaller house it's time to stop the project and move on to other matters. But, the good news is I've got a lot of great stuff for sale!!
For those of you that may recall I was building a BEC middy that I designed myself. It was a tube frame, 2 seater that used some S2000 pieces and a pushrod suspension. Anyway, Except for the skin, it was built, ran and worked! Yay me! So let's get after it.
* LOCATED IN TORONTO, CANADA *
- 2000 R1 dual headlight assembly with new working bulbs.
- 2000 R1 newer radiator
- Speedo Healer
- Pull-type clutch slave
- 11 gal upright aluminum fuel tank
$100- Flaming River Cobra/MGB manual steering rack (FR1512)
$150- Wheels and tires. It's the buyers responsibility to verify fitment before purchasing. AP1 S2000 fitment
$1500Qty 2, 17x7, 5-114, ET45, Enkei Racing RFP1 Silver,
15lbs ea, P/N: 379-770-6545SP
Qty 2, 205/50R17 Yoko Advan Neova AD07
Qty 2, 17x8, 5-114, ET45, Enkei Racing RFP1 Silver,
16lbs ea, P/N: 379-780-6545SP
Qty 2, 225/45R17 Yoko Advan Neova AD07
I should also have the Enkei center caps around and I'll throw in a set of spline drive nuts.
- Wilwood Forward Mount Brake and Clutch Triple Master with Balance Bar 340-3950
http://www.wilwood.com/Pedals/PedalList.aspx Was $250 new. Used for mock up only.
$125- 1 Sparco Circuit seat with uprights and slider
$250- Set of 2 Schroth Rally road legal belts (roll cage mount)
- Momo Mod 26 290MM steering wheel with Bicknell splined (not hex) QR.
$150- Sheets of aluminum - it's 6061-T6 0.032"... I should have 2, 4'x12' piece and 1, 2'x8' piece. [/color]
This stuff isn't cheap... But my price is! $300*** PENDING SALE *** - 2000 R1 engine with new clutch, airbox, fuel pump, gauges, switches and harness (spliced with servicable deutsch automotive connectors $$$)
*** PENDING SALE *** - Hawk Adapter
*** SOLD *** - Tilton 3 Pedal Floor Mount
http://www.tiltonracing.com/content.php?page=list2&id=8&m=bI also have the throttle linkage, right angle bias adjuster and bias adjuster. Was over $900 new.
*** PENDING SALE *** - Wilwood Reverse Mount Brake and Clutch Triple Master with Balance Bar 340-3342
http://www.wilwood.com/Pedals/PedalList.aspxWas $250 new. Used for mock-up only.
*** SOLD *** - 2 Sparco Sprint V seats with uprights and sliders
$250 each*** SOLD *** - Set of 4 Dynamic coil overs from a Shelby Series 1. These are fairly well documented in the forums.
*** SOLD *** - I also have a Rebel Wiring 20 Circuit Rear Mount Wiring Harness Item# RW20-RM. Never used. (Almost for got about that until I read the build log...)
*** SOLD *** Welding package $500More to come later as I dismantle and sift through the boxes of stuff I have.
Thanks for looking!
Cheers,
Mike