LocostUSA.com

Learning how to build Lotus Seven replicas...together!
It is currently March 29, 2024, 12:46 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 412 posts ]  Go to page 1, 2, 3, 4, 5 ... 28  Next
Author Message
 Post subject: wyked's 3-wheeler
PostPosted: January 21, 2008, 2:06 pm 
Offline
User avatar

Joined: August 9, 2007, 2:07 pm
Posts: 302
Location: Downingtown, PA
Hello All,

I've been lurking around for some time but haven't really posted anything as my build certainly is "non-traditional", but sharing the same philosophy (and some hardware) as a Locost. I was on the fence to build either a Locost or a 3-wheeler and finally fell to the side of loosing a wheel for many reasons. I'm just curious how welcome a build log would be from someone missing a wheel (or a few marbles depending on your perspective)? I'd certainly be interested in your feedback as the more eyes that are looking over my shoulder the more ideas for potential problems/solutions.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: January 21, 2008, 2:28 pm 
Offline
User avatar

Joined: September 17, 2007, 10:36 pm
Posts: 209
Location: Montreal, Canada
Do it... we're already a crazy enough to consider building our own cars. Many of us would love to see what other like-minded individuals have come up with. :lol:

_________________
Concordia University FSAE - Chassis
00 Impreza OBS - RIP
81 Rabbit 1.6D
95 525i


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: January 21, 2008, 2:42 pm 
Offline
User avatar

Joined: December 5, 2006, 10:42 pm
Posts: 457
Location: Metro Detoit
Post it. There are arguments for and against 3-wheelers so you will certainly get a bunch of different opinions, but you should also get lots of help and insight. All new ideas are welcome here. Never know, you might create a new building craze.

_________________
Build sold to a new loving home. May start another one when I have more time to devote to it. For now I play with my boat, Datsun 240Z, and GS700 motorcycle.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: January 21, 2008, 2:54 pm 
Offline

Joined: December 6, 2007, 1:31 am
Posts: 204
Location: Nebraska
From the looks of your av, you have already put a lot of effort into it. Post it up!


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: January 22, 2008, 9:28 am 
Offline
Automotive Encyclopedia
User avatar

Joined: December 22, 2006, 2:05 pm
Posts: 8037
Less is more around here. My favorite is the GX3 with the fwd assy behind the driver and a sprocket output from the transaxle.

The layout in the avatar typically has a very long wheelbase for the motorcycle driveline. I would avoid bike tires all around unless you design it to lean. They dont last very compared to a car tire.

_________________
Miata UBJ: ES-2074R('70s maz pickup)
Ford IFS viewtopic.php?f=5&t=13225&p=134742
Simple Spring select viewtopic.php?f=5&t=11815
LxWxHt
360LA 442E: 134.5x46x15
Lotus7:115x39x7.25
Tiger Avon:114x40x13.3-12.6
Champion/Book:114x42x11
Gibbs/Haynes:122x42x14
VoDou:113x44x14
McSorley 442:122x46x14
Collins 241:127x46x12


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: January 22, 2008, 12:35 pm 
Offline
User avatar

Joined: August 9, 2007, 2:07 pm
Posts: 302
Location: Downingtown, PA
Thanks for the encouragement! Once I find someplace to upload my pictures I'll post a build log to date. Unfortunately progress is slow due to limited funds but I'm hoping all of your experience will keep me from heading down the wrong path (in some respects I may have already gone the wrong way). To answer your questions, yes I am using car tires all around and it is mid-engine so the drive line is pretty standard motorcycle chain drive with the exception of a jackshaft in order to accommodate the wider rear tire. I'll post more soon...


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: January 22, 2008, 1:07 pm 
Offline
User avatar

Joined: July 14, 2006, 2:54 pm
Posts: 449
Location: Corning NY
interesting build.


www.photobucket.com is a nice and easy place to host pics.

Good luck
Ken

_________________
http://kenbuilt79.blogspot.com/


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: January 22, 2008, 2:22 pm 
Offline
Locostering Information Liaison
User avatar

Joined: August 17, 2005, 1:30 am
Posts: 2397
Location: So CALIFORNIA
Any thought to which power plant/engine you will be using?

Ever hear of the Dave Norton's Shrike...
http://www.nortonshrike.com/shrike.htm

He seems like a very approachable guy....
(there is a build project discussed that looks similar to yours, any connection?)
http://www.nortonshrike.com/shrike_askmr.htm#latest


Keep up the good work. I look forward to seeing more!

_________________
I'll keep an eye out for you!

To err is human...
I am more human than most.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: January 22, 2008, 3:28 pm 
Offline
User avatar

Joined: August 9, 2007, 2:07 pm
Posts: 302
Location: Downingtown, PA
Thanks Kenlude97, I'll check out photobucket tonight, I can't access it here at work.

Mr. Peabody.d, the donor was/is an '84 Kawasaki GPz1100. 120 Hp/75 ftlbs and fuel injected. The bike was apparently big with drag racers as it could be punched out to 1400cc and still take a beating. The down side is it's aircooled so it will be needing ducting for cooling air, part of the reason for the "sidepods".

I've spoken to Dave Norton a few times, and he is every bit as nice and approachable as people say he is. That is in fact me and my project on his site. I went over the project with him before I started to be sure I had my head on straight.


Top
 Profile  
Reply with quote  
 Post subject: Morgantown PA?
PostPosted: January 22, 2008, 8:24 pm 
Offline

Joined: December 2, 2006, 7:17 am
Posts: 88
I'm in chester springs. have you started cutting metal yet?

How have you deisgned the front supension, from my vantage it looks sort of "leany" on the upper front arm?

How are you working around the lean in turns with a flat rear tire?

I love the triangulation and the side "pyramids".


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: January 22, 2008, 8:30 pm 
Offline

Joined: December 2, 2006, 7:17 am
Posts: 88
wyked, i'd love to come check out your project.

check my flickr page http://www.flickr.com/photos/11292885@N02

Although I'm not as accomplished as some of the folks here. I'd love to check it out.

Where are you getting your metal?


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: January 22, 2008, 11:19 pm 
Offline
User avatar

Joined: August 9, 2007, 2:07 pm
Posts: 302
Location: Downingtown, PA
tigris,

The front suspension is still in the works, I'm not sure what you mean by "leany"? It's going to be a pull rod suspension but everything else is just in CAD as a base design. I'm still working on the mounting locations and a-arms as I get more pieces of the puzzle and read and reread all the books out there. As far as body roll goes, it's obviously going to be a problem so I'm working on keeping my CG low and a suspension configuration that limits roll as much as possible. Maybe running a higher roll center, or simply a heafty ARB, time will tell.

In terms of cutting metal, yes and no. Considering my survival depends on the integrity of the frame, I got my co-worker (prof. welder) to weld the frame up for me. In the mean time I'm just saving up for my own welder, working on the design, practicing my welding at work and picking up parts whenever I can. As far as metal goes I've been sourcing it from a few places, Fazzio's in NJ and places on-line like McMaster Carr.

Send me a PM and we can work out some time to stop by if you want. Attached is a picture of the progress to date, excuse the rattle can paint job...


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: January 23, 2008, 8:46 am 
Offline
Automotive Encyclopedia
User avatar

Joined: December 22, 2006, 2:05 pm
Posts: 8037
Excellent. Except for the upper control arms, the frame seems to have all the nodes in the right place. Well done.

_________________
Miata UBJ: ES-2074R('70s maz pickup)
Ford IFS viewtopic.php?f=5&t=13225&p=134742
Simple Spring select viewtopic.php?f=5&t=11815
LxWxHt
360LA 442E: 134.5x46x15
Lotus7:115x39x7.25
Tiger Avon:114x40x13.3-12.6
Champion/Book:114x42x11
Gibbs/Haynes:122x42x14
VoDou:113x44x14
McSorley 442:122x46x14
Collins 241:127x46x12


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: January 23, 2008, 10:10 am 
Offline
User avatar

Joined: October 16, 2007, 8:53 pm
Posts: 135
Location: Lyle, WA
Nice work.

Admim dudes: Can we get this thread's title changed and stickied?

P


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: January 23, 2008, 2:16 pm 
Offline
Locostering Information Liaison
User avatar

Joined: August 17, 2005, 1:30 am
Posts: 2397
Location: So CALIFORNIA
Title changed and stickied...( wyked if you want to change the the title edit your first message and modify the subject line).


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 412 posts ]  Go to page 1, 2, 3, 4, 5 ... 28  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
POWERED_BY