My rear springs are just that 275/10". I will swap them out and see how it looks then. Thanks.
To me, as a novice, the springs with 375 feels quite soft, I'm not sure if the 275s will not be to soft.
Ready for coilovers, but I need help choosing them
Moderators: dhempy, a.moore, horizenjob
- tibimakai
- Posts: 643
- Joined: January 14, 2021, 12:19 pm
- Building: 442E
- Location: San Dimas, CA
Re: Ready for coilovers, but I need help choosing them
Last edited by tibimakai on March 6, 2025, 12:20 pm, edited 1 time in total.
Tibor
'20 Alfa Romeo Stelvio daily
Locost/442E in progress
'20 Alfa Romeo Stelvio daily
Locost/442E in progress
- Miatav8,MstrASE,A&P,F
- Automotive Encyclopedia
- Posts: 8132
- Joined: December 22, 2006, 2:05 pm
Re: Ready for coilovers, but I need help choosing them
The springs will either hold the car up on that corner to ride height or they will not. Resistance to body roll is from swaybars. Stiffness can be increased with damping adjustment or using shorter, higher rate springs that come off the seat in droop or droop is limited or a soft spring is added to the stack (generally flat wire springs) to take up the difference in droop but stack solid at ride height.
Miata UBJ: ES-2074R('70s maz pickup)
Ford IFS viewtopic.php?f=5&t=13225&p=134742
Simple Spring select viewtopic.php?f=5&t=11815
LxWxHt
360LA 442E: 134.5x46x15
Lotus7:115x39x7.25
Tiger Avon:114x40x13.3-12.6
Champion/Book:114x42x11
Gibbs/Haynes:122x42x14
VoDou:113x44x14
McSorley 442:122x46x14
Collins 241:127x46x12
Ford IFS viewtopic.php?f=5&t=13225&p=134742
Simple Spring select viewtopic.php?f=5&t=11815
LxWxHt
360LA 442E: 134.5x46x15
Lotus7:115x39x7.25
Tiger Avon:114x40x13.3-12.6
Champion/Book:114x42x11
Gibbs/Haynes:122x42x14
VoDou:113x44x14
McSorley 442:122x46x14
Collins 241:127x46x12
Who is online
Users browsing this forum: No registered users and 13 guests