Well, after building the rear suspension I went on to pedals. I wasn’t able to build them entirely, just get a good start on them until my master cylinders come in.
https://youtu.be/czljd7u4o0cAttachment:
D16E26BB-58A2-461D-B15C-419D44E97C13.jpeg
After pedals were built I revisited my steering setup. I was concerned with the angle between the tie rod and the steering rack when looking at the outside tire. The angle would have likely bent something so I decided to move it as far as I could towards the rear. While apart I also made new sprocket adapters to run double chains, and a tensioner to keep everything taught. This also required me to make new brackets on the uprights to reposition that mount, so I made them with adjustable height as well. That way I can get the bump steer perfect.
https://youtu.be/vo_r0d6O_3gAttachment:
35B23FDE-6F5A-4708-AB10-6CCA6E2FC39C.jpeg