LocostUSA.com

Learning how to build Lotus Seven replicas...together!
It is currently July 24, 2021, 8:00 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 29 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: February 22, 2020, 5:23 pm 
Offline

Joined: January 8, 2008, 7:49 pm
Posts: 66
Location: Baton Rouge
*****She's gone! Good luck to Jamador!******


Well, it's been too long, and I haven't touched my project. She's lived in a trailer in my driveway for quite some time now.

Much of this build was inspired from this forum many moons ago.

Build was going to be for autocross use. I moved and the dream never got finished.

The frame is probably 80% complete, will still need some final welding, clean up, etc. It is in rough shape, but should be very salvageable.
All items seen in these pics are included.
Pictures here:

https://www.dropbox.com/sh/tm5pp32phcden7f/AAAvjj1BsFyOIWWrR19ozt24a?dl=0

The engine in the car is not running, was used for fitment only.
Was going to be a dry sump setup on the 13B.

Lots of really nice parts here, most were brand new. Had high hopes for it like we all do!

Haltech ecu, racepaq display and a mess of sensors
Innovate wideband and controller
Electric water pump
Will wood brakes all around, wilwood MC / Gas /Clutch pedal assy
RX7 rear end, freshly rebuilt, lsd
RX7 5 speed
15x10 wheels
Seats and covers are in like new condition
Nosecone and fenders from Jack on here
MSD Ignition
Large Custom radiator
Large Oil Cooler
Shocks from a shelby series 1, brand new - shorter springs included
Lots of extra hoses, fittings, suspension parts
Driveshaft and axles are all fit
Most of the electrical harness is complete
rear suspension is not completed, close though - parts included.

You bring your trailer here and haul off everything, no shipping. Located outside of Baton Rouge, LA.
$3000 OBO.

PM for contact info.

Thanks all!

James


Last edited by Geauxkart on April 10, 2021, 4:35 pm, edited 1 time in total.

Top
 Profile  
Reply with quote  
PostPosted: February 23, 2020, 9:32 pm 
Offline

Joined: March 17, 2017, 5:51 pm
Posts: 21
Geauxkart wrote:
Well, it's been too long, and I haven't touched my project. She's lived in a trailer in my driveway for quite some time now.

Much of this build was inspired from this forum many moons ago.

Build was going to be for autocross use. I moved and the dream never got finished.

The frame is probably 80% complete, will still need some final welding, clean up, etc. It is in rough shape, but should be very salvageable.
All items seen in these pics are included.
Pictures here:

https://www.dropbox.com/sh/tm5pp32phcden7f/AAAvjj1BsFyOIWWrR19ozt24a?dl=0

The engine in the car is not running, was used for fitment only.
Was going to be a dry sump setup on the 13B.

Lots of really nice parts here, most were brand new. Had high hopes for it like we all do!

Haltech ecu, racepaq display and a mess of sensors
Innovate wideband and controller
Electric water pump
Will wood brakes all around, wilwood MC / Gas /Clutch pedal assy
RX7 rear end, freshly rebuilt, lsd
RX7 5 speed
15x10 wheels
Seats and covers are in like new condition
Nosecone and fenders from Jack on here
MSD Ignition
Large Custom radiator
Large Oil Cooler
Shocks from a shelby series 1, brand new - shorter springs included
Lots of extra hoses, fittings, suspension parts
Driveshaft and axles are all fit
Most of the electrical harness is complete
rear suspension is not completed, close though - parts included.

You bring your trailer here and haul off everything, no shipping. Located outside of Baton Rouge, LA.
$3000 OBO.

PM for contact info.

Thanks all!

James


Wow. If I had more garage space I'd be making arrangements. It looks like everything you've done was done very well. Oil plumbing, brake lines, chassis, control arms...all look done well. Sorry that you couldn't finish it...it can be a struggle. Good luck with the sale.

AP


Top
 Profile  
Reply with quote  
PostPosted: March 12, 2020, 3:23 pm 
Offline

Joined: September 19, 2017, 12:26 am
Posts: 1
Geauxkart wrote:
Well, it's been too long, and I haven't touched my project. She's lived in a trailer in my driveway for quite some time now.

Much of this build was inspired from this forum many moons ago.

Build was going to be for autocross use. I moved and the dream never got finished.

The frame is probably 80% complete, will still need some final welding, clean up, etc. It is in rough shape, but should be very salvageable.
All items seen in these pics are included.


Is it still available? PM me please.
For some reason PM feature isn't available to me.


Top
 Profile  
Reply with quote  
PostPosted: April 23, 2020, 2:12 pm 
Offline

Joined: November 27, 2018, 12:54 pm
Posts: 2
I'm interested too but for some reason PM's aren't working.

Please email me: rdcyclist at msn dot com.

Tanks,
Mark


Top
 Profile  
Reply with quote  
PostPosted: May 2, 2020, 5:10 pm 
Offline

Joined: January 8, 2008, 7:49 pm
Posts: 66
Location: Baton Rouge
Guys - best offer!!!
Surely someone needs a nice project. I can't move on to my next project till this one is gone. Lots of really nice stuff for the $$.

Will start parting out soon If I don't find a buyer.

Thanks,
James


Top
 Profile  
Reply with quote  
PostPosted: May 6, 2020, 9:48 am 
Offline

Joined: May 5, 2020, 7:48 pm
Posts: 2
Hello James-

I have some questions for you involving your frame sale and it appears that PM is not working(though I'm new here).

(email deleted)

Could you drop me a note when you get a moment so we can discuss it?

Best,

Nick


Last edited by Nickelodeon29072 on May 11, 2020, 8:36 am, edited 1 time in total.

Top
 Profile  
Reply with quote  
PostPosted: May 7, 2020, 11:34 am 
Offline

Joined: May 5, 2020, 7:48 pm
Posts: 2
Double post, sorry!


Top
 Profile  
Reply with quote  
PostPosted: July 1, 2020, 3:31 pm 
Offline

Joined: June 29, 2020, 4:46 am
Posts: 2
Is this still available? Very interested but new to the forum, so I cannot PM

Harmon


Top
 Profile  
Reply with quote  
PostPosted: August 29, 2020, 10:41 am 
Offline

Joined: January 8, 2008, 7:49 pm
Posts: 66
Location: Baton Rouge
Bump for this thread.
If you want a project, please come take it. I need this gone, and will take any offer as long as you continue the build!

email to my username at gmail.com


Top
 Profile  
Reply with quote  
PostPosted: August 29, 2020, 12:01 pm 
Offline
User avatar

Joined: November 11, 2013, 4:47 am
Posts: 1429
Location: No. Nevada
Being so far East maybe post it to GRM?

_________________
If I must be a one-man PC free zone, so be it!


Top
 Profile  
Reply with quote  
PostPosted: August 29, 2020, 12:46 pm 
Offline
User avatar

Joined: July 17, 2008, 9:11 am
Posts: 5909
Location: West Chicago,IL
Nobody is interested? I can personally say the thrill of a 13B in such a light car is a blast to drive. the 13B really comes alive ~4-5k RPM. I hope somebody picks up this project and sees it thru to the end. Tommy, can you hear me? :mrgreen:


Geauxkart, sorry to see you stall out. Good luck with this sale. If you have no takers, you may just have to part it out. You've got a lot of goodies in that package.

_________________
Chuck.

“Any suspension will work if you don’t let it.” - Colin Chapman

Visit my ongoing MGB Rustoration log: over HERE

Or my Wankel powered Locost log : over HERE


Top
 Profile  
Reply with quote  
PostPosted: August 29, 2020, 8:09 pm 
Offline
User avatar

Joined: October 19, 2012, 9:25 pm
Posts: 3316
Location: Summerville, SC
PM Sent

_________________
Too much week, not enough weekend.

OOPS I did it again
http://www.locostusa.com/forums/viewtopic.php?f=35&t=17496

Blood Sweat and Beers
http://www.locostusa.com/forums/viewtopic.php?f=35&t=15216


Top
 Profile  
Reply with quote  
PostPosted: October 7, 2020, 2:32 pm 
Offline

Joined: October 19, 2010, 11:24 pm
Posts: 88
If you still have this I may be interested.


Top
 Profile  
Reply with quote  
PostPosted: December 5, 2020, 11:06 am 
Offline

Joined: January 8, 2008, 7:49 pm
Posts: 66
Location: Baton Rouge
Guys - one last bump here. Going to start parting out the project. Would love for someone to scoop this up, and would make you a hell of a deal. Don't have the motivation or time to sell all of these parts, but this stuff needs a better home!


Top
 Profile  
Reply with quote  
PostPosted: December 8, 2020, 1:31 pm 
Offline
User avatar

Joined: January 7, 2011, 10:47 am
Posts: 135
Location: Bethlehem PA
I can't believe no one is interested in this? If I wasn't 20 hours away I would jump on this.

_________________
Chris White
Locost 7 type 1 power and a rear transaxle
Lotus Elise Sold
ND Club Miata
Nissan Titan Sold
Rubi Wrangler
http://www.locostusa.com/forums/viewtopic.php?f=35&t=13200


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 29 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
POWERED_BY