Locost 11 R1

[B85]

And the other side. Now some trimming and back on the car.
Was a bigger gap on this side.
Easy !

[B85]

So the front is off why not do some bracket welding ?

[B85]

Nose is trimmed and reinstalled. Came out great.
Ready for body work.

Also got started on the rear. Trimmed away all the glass and foam from the fender work and will add the flange's.
Photos are from the right and the left to see what needed to be trimmed away.

[B85]

More flange work.
And all the foam it trimmed away but still need to add some glass to close it up.

[B85]

Some trimming and filling and ?

[B85]

Cuts made on the rear left side. To make it fit the lines.
Top glass on and next will be a light grind down on the inside and some more glass.

[B85]

Trimmed up and ready to do the work on the inside.
Thinking about a flange ?

[B85]

Think I came up with a way to add a flat flange ? We will see tomorrow, with luck .

[cs3tcr]

All that fiberglass work has me reliving both the 11 and the Europa. Itching for days and days.

[B85]

Ya cs3tcr , but its like the DRY heat here ?

One more flange and a new inside skin done.

[B85]

On to more fun !

[B85]

Number 2 is done.

On to trimming and then body work.

[B85]

Got some work done today in the morning but had to stop.
The temp of 118 Deg. and the cooler can only do 110.

[B85]

Sanding and fitting.

[B85]

Started on the afterthought fuel tank.
Going to install a sump and work on the mount.
Will need to move some brackets that I installed.
Also going to kill the polish, way to shinney.
Its 15 gallon .